Steam sterilizer for 1 up to 2 StU - Standard Line

Steam steriliser with 1 to 2 StU for use in ambulances, clinics and doctors' surgeries, but also in other health care facilities where instruments, utensils, laundry, plastics, complicated MIC instruments and other medical products need to be sterilised quickly and reliably

Thanks to the integrated steam generator, only a high-voltage connection and a water connection are required for installation.

Technical data:
  • One or two-door version
  • Manual chamber door with electromotive assistance
  • Surface processing of the inside chamber walls: blasted
  • Operated with steam from outside or optionally with integrated steam generator
Ease of use:
  • The manual chamber door can be operated with very little effort. An electric motor assists in the sealing of the door when it is closed.
  • Large touch screen buttons with clear symbols
  • Large TeleClock remaining time display for time-optimised work processes.
  • Self-explanatory navigation through the program menu.
  • Sterilization chamber, doors and chamber jacket are made of high quality CrNiMo steel (AISI 316L)
  • 5 sterilising programs, and 3 test and service programs
  • Integrated water saving feature
  • Can be connected to an external PC with an A4 printer
  • Self-diagnostics feature
  • Basic inset for loading
  • Device cladding made from CrNi steel
  • Powerful water ring vacuum pump
  • 8.4" colour touch screen
  • Easily accessible components
  • Integrated self-diagnosis feature
  • Electric steam generator with automatic desalination system, either 7.5 kW or 15 kW
  • Customer-specific special program
  • Chip card and chip card reader
  • Chamber rails
  • Loading carts (if chamber rails are equipped)
  • Transport carts
  • Media monitoring
  • Interruption-free power supply for the controller
  • Autostart function
  • Interior surface of the chamber is polished
  • Equipment to suit requirements, such as transport carts and various equipment versions
  • Integrated waste water cooling

The steam pressure is regulated by means of absolute pressure sensors, independent of atmospheric air pressure fluctuations, ensuring the greatest process reliability.

Temperature development in the sterilising chamber is measured with tried-and-tested PT100 sensors. Every determined value is constantly compared to the target values saved in the control unit. All pressure and temperature sensors are provided in duplicate so that the process parameters can be controlled and registered independently.

Two separate microprocessors control the equipment and monitor the parameters, and also record the process data and document the batch data.

Additional safety is provided by four password-protected menu levels that allow only authorised operating employees to access relevant parameter inputs.

  • The process curves and parameter information are displayed on the screen. All data can be transmitted to a sterile goods documentation system or an external PC and printed out using an A4 printer.

  • The manual chamber door can be operated with very little effort. An electric motor assists in the sealing of the door when it is closed.
  • Large touch screen buttons with clear symbols
  • Large TeleClock remaining time display for time-optimised work processes.
  • Self-explanatory navigation through the program menu.
  • AN material
  • Hollow items
  • Implants
  • Instruments
  • MIS
  • Linen

At a glance

Application: Hospital
Type: Sterilization
Process: Steam
Material to be treated: Solid & porous goods

Capacity

  • 1-2 STU

Downloads