If a supply of pure steam is not available on site, your sterilizer can be operated together with an MMM steam generator. No matter how your facilities are laid out, the steam generator can be integrated into the sterilizer, or can be installed next to, above or away from the steam consumer. The steam generator can be conveniently operated from the sterilizer control panel.
The technical highlights:
The Unotherm II is a pure steam generator that offers high performance with low energy requirements. It has been specially designed for facilities without a central steam supply. It can also be used for cost-effective steam generation in an emergency or on weekends. The boiler output can be optimized to meet the specific requirements of the connected sterilizer.
For example to keep the proportion of non-condensable gases in the sterilization steam as low as possible, the boiler feed water is thermally degassed in a process controlled and monitored by a temperature sensor. The quality of the boiler water is maintained at a constant high level by automatic blow-down. The blow-down can optionally be conductance-controlled. This completely eliminates the possibility of performance being affected due to deposits and corrosion. The service life of the boiler components is extended, and instruments are protected during sterilization. The boiler performance can be optimally adjusted to the requirements of the connected sterilizer, because the Unotherm II is available in models from 36 kW to 81 kW in 9 kW steps. The Unotherm II offers a high steam output with a consistently low connected load.
Download the brochure and find out more about the Unotherm II